Magnetic Toolboard 61x38cm

Campnetic Toolboard with Magnetic Mounts:

• 4 × Ø 88 mm rubber-coated neodymium magnets (56 kg holding force per magnet)
• Flexible Magnet Positioning in Round Holes
• Expandable with additional magnets
• M8 holes for mounting accessories
• Magnetic board surface
• Can be mounted using screws, magnetic mounts, or a tension strap

Themagnetic toolboard —also known as a Molleboard, utility board, or organizer board—is the flexible organization solution for van life, off-roading, and camping. With four rubber-coated neodymium magnets (Ø 88 mm, 56 kg holding force each), it can be attached to the vehicle in a variety of ways—without any drilling. The magnets can be inserted into any round hole on the board, allowing for optimal positioning. For heavier loads, the board can be expanded with additional magnets from us. The surface is magnetic, so magnetic mounts will hold directly to it. Accessories can be easily attached using M8 screws or secured with a tension strap. The rubber-coated magnetic base protects the paint, and installation—as well as removal—takes just seconds.

Material & Finish

The toolboard is made of ferromagnetic iron, which ensures maximum stability and perfect holding power for our magnets.

The surface is finished in a multi-step process:

1. Shot Blasting: The surface is thoroughly cleaned and roughened to optimize adhesion and durability.
2. Acid Washing: Chemical removal of rust and oxide layers to create a clean surface.
3. Electrocoating (E-Coating): Application of a primer using an electrodip process for long-lasting corrosion protection.
4. Powder Coating: Electrostatic application of a polymer powder coating, followed by thermal curing—for a durable, UV-resistant, and weather-resistant finish.

Result: A sturdy, durable toolboard that perfectly combines magnetic strength, functionality, and style—ideal for use on the go, on off-road adventures, or in a camper.

Under §22 ofthe StVO, this product is considered cargo on the vehicle. The vehicle owner and driver are responsible for securing and using the cargo properly. We assume no liability for improper use. 

Important Note – Please be sure to take note of the following:
The magnets have an extremely high holding force. Therefore:
The holders must never be placed directly against each other with the magnetic sides touching—only with the white spacer in between.

We always ship the magnets with spacers and never ship them placed directly on top of one another. Without this protection, damage may occur when they are stacked.

Important: If the magnets do happen to stick together by accident without the spacers,
Under no circumstances should you try to pry it open with a tool or any other object.

This can cause damage—either to the magnets or to you.
In that case, please contact us before you do anything. We're here to help.

If you ignore this notice and damage occurs, we unfortunately cannot accept the return of the product or issue a refund.

Design Protection: This product is protected by a registered design with the European Union Intellectual Property Office (EUIPO). Similar designs or imitations are therefore not permitted.

Länge: ca. 61cm
Breite: ca. 38m
Höhe mit Magneten: ca. 2cm
Dicke Toolboard: ca. 3mm

Gewicht: ca. 3kg inkl Halterungen
Magnete:
Durchmesser: 88mm
Haftkraft: ca. 56kg (ca. 549N)
Verschiebekraft: ca. 17kg (ca. 165N)

Material Toolboard: Pulverbeschichteter Stahl
Material Schrauben: Edelstahl rostfrei

Maße der Auflagefläche und Magnetabstände: Variabel, siehe Bilder

1x Toolboard 61cm x 38cm
4x Campnetic Magnet 88mm mit M8 Gewindebuchse
4x M8x8 Schraube
4x M8 Schraubenkappe

Shipping:
Germany: Campnetic ships within Germany via DHL.
- Shipping is free for orders of €100 or more .
- For orders under €100 , shipping costs €5.99.
International:
International shipments are made via DHL or GLS.
- Costs vary depending on weight and country (starting at 9.99 €).
- For Switzerland and Austria, shipping is free on orders of 250€ or more.

Please note: For orders outside the EU, customs fees may apply to the customer. You can find more information here: Shipping Costs

Returns:
Unused items can be returned within 30 days. Simply visit our returns portal at or send your return to:

Dein-Versand GmbH
c/o Campnetic
Friedrich-Ebert-Straße 275
58566 Kierspe

PDF-Anleitung ansehen

View General Safety Instructions